Technical Characteristics - Rapid EG320 Notice Technique

ELECTRIC HOT MELT APPLICATOR: EG320
Operating instructions

Technical Characteristics

Dimensions (HxLxW) 20,5 x 24 x 4,5 cm
Weight : 0,47 kg
Working voltage : 220V-240V~, 50Hz
Power rating : 120W at start-up, 15W in use
Temperature : Self-regulated
Glue sticks: Rapid Ø 12mm
Safety Instructions
Read safety rules and in-
structions carefully before
using this machine.
Warning: This tool must be
placed on its stand when
not in use.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory and mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
• Do not use or store this machine
in a humid environment. Do not
place it where it may be splashed
by water. Do not expose it to
extreme changes in temperature
during or directly after use.
• Only use it indoors on a clean, dry
work surface. Excessive dust and
dirt may reduce lifetime of this
tool.
• Never unplug the machine by
4
pulling the cable.
• If the power cable is damaged
or cut, remove the plug from the
electric socket immediately and
do not use the machine. It must
be replaced by the manufacturer
or its service agent or a similar
qualified person in order to avoid
a hazard.
• Unplug the machine when not in
use, before any servicing opera-
tions (maintenance, cleaning etc.)
• Always verify that the appliance is
attached to a ground socket.
• When using an electric extension
cable, check that it is in good
working order and that it has a
ground socket.
• Never use the tool if it is dam-
aged in any way.
• Never insert objects other than
Ø12mm Rapid glue sticks into
the machine.
• Never remove a glue stick that
has already been inserted.
• It is normal for this tool to become
quite warm during use. This is
normal and does not indicate a
problem.
• Hot Surfaces: the nozzle of the
appliance and the glue can reach
a temperature of approx. 200°C.
Do not touch the heated nozzle
or the hot adhesive. Avoid any
contact with the skin. If you burn
yourself, put the burn in cold
water immediately. Never try to
remove a large quantity of glue
without medical help.