Publicité
Les langues disponibles
Les langues disponibles
Replacement
• At an angle of 90 degrees, turn the jaw case pin A and push it out as shown in Fig. 1.
• Take out the jaw case from the frame and change the jaws as shown in Fig. 2.
Jaw pusher
Jaw-case
Assembly
• Put the jaws and parts in the right order as shown in Fig. 3.
• As illustrated, use the attached spanner to push the spring down into the jaw case, then insert a blind rivet
into the temporary pin hole B on the sides of the jaw case to prevent the spring from jumping out as shown
in Fig. 4.
• Set the temporary pinned jaw case into the frame of the body and then insert the jaw case pin A as shown
in Fig. 5.
Then pull out the temporary pinned rivet.
2
Spring
Jaw
Rivet dia.
jaw case pin
Grip range
1/8''
1/8'', 1/4'', 3/8''
5/32''
1/8'', 1/4'', 3/8''
3/16''
1/8'', 1/4'', 3/8''
727819090GBNLFE
Spanner
Rivet material
Aluminium, stainless steel
Aluminium, stainless steel
Aluminium, stainless steel
GB
v1.0 06112012
Publicité
