Your New Clipper And Beard Trimmer Ii; Before First Use; Charging - Unold Premium 87815 Notice D'utilisation

your new cLIPPer anD BearD trImmer
1 EIN/AUS [ON/OFF] switch
2 Adjustment wheel for comb
attachment
3 Adjustment slider for
thinning
4 Adjustment slider for shear
blade

BeFore FIrSt uSe

1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. Insert the shaving head.
3. When you want to use the comb attachment,
attach it to the appliance. Hold the
appliance with one hand and attach the

chargIng

1. Connect the lead cable to the charger.
2. Connect the mains adapter to the wall
socket.
3. Make sure that the appliance is dis-
connected.
4. Put the appliance in the charger ensuring
it is switched off. Make sure that the
appliance is correctly inserted as otherwise
it will not be charged properly.
5. Make sure that the charger is placed firmly.
6. Connect the jack of the lead cable to the
plug socket on the charger.
7. The red indicator light on the appliance
lights up, indicating that the appliance is
being charged.
8. To avoid damage to the accumulators, the
appliance should not be charged for more
than 12 hours.
9. Please note that the red indicator light does
not turn off once the appliance is charged.
14
All manuals and user guides at all-guides.com
2
3
1
desired comb with the other. The comb has
to latch into place to be firmly connected to
the appliance.
4. Before first use, charge the accumulators
completely. For more information about how
to charge the appliance see the next chapter
„Charging".
10. Depending on the application and the hair
characteristics the appliance can be used
40 minutes before needing to be recharged.
The maximum capacity of the accumulators
is only achieved after being charged several
times.
11. Only charge the appliance when the accu-
mulators are completely empty. This ensures
that the performance of the accumulators
lasts longer.
12. You may also connect the lead cable directly
to the appliance, when the accumulators
are completely empty and you have not yet
finished shaving. Connect the lead cable
to the plug socket in the lower part of the
appliance and connect the mains adapter to
the wall socket.
13. Attention: Never connect the appliance to
the mains without the accumulators ins-
erted.
4