Dustbane Gladiator 464 Manuel De Pièces Et D'opérations page 5

Machine and Control Panel Components
The machine is equipped with a simple panel control that controls all the operational functions of the machine.
The functions located on the control panel can be explained as follows:
A) On-Off main switch of the machine: Main switch to turn on and off the machine.
B) Led indicator for battery charge: Green for when the machine is charged, red for when the machine is discharged and yellow for
when the machine charge is in reserve or when the machine is being charged.
C) Display switch: Numeric display switch: pressing this switch, a part from seeing the machine voltage, the display indicates the
working hours of the machine (pressing the switch once) and minutes (pressing the switch twice).
D) On-Off sweeping mode switches 1 and 2: these two switches allow the machine to work with two separate sweeping mode:
mode 1 for light debris collection and mode 2 for heavy debris collection.
E) Manual operating switch of the filter shaker: gives the possibility in shaking the filter at any time during work. This is to be
intended as an addition to the automatic filter shaking that cycles every 3 minutes.
F) Vacuum fan switch: the vacuum fan automatically activates when sweeping mode is on. Therefore the switch is used when the
requirements are to switch off the vacuum fan during sweeping mode.
G) Numeric display
A)On-Off main switch of the machine
B) Led indicator for battery charge
C) Display switch
D) On-Off sweeping mode switches 1 and 2
E) Manual operating switch of the filter shaker
F) Vacuum fan switch
G) Numeric display
A) Control Panel
B) Charger Fuse (2,5A)
C) Handle Locks
D) Bumper
E) Side Brush
F) Top Cover
G) Charger Cord Compartment
I) Hopper
L) Flap Raiser ( 664 )
5