Machine Preparation; Handle Assembly; Connecting The Battery - Dustbane Gladiator 464 Manuel De Pièces Et D'opérations

Machine Preparation

Side Brush Assembly
• Raise the front part of the machine
• Slide the brush on to the shaft until it locks into place.

Connecting the Battery

• Remove the top cover to gain access to the battery
using the 4 mm hex wrench provided.
• Locate the two Red/Black connectors.
• Align the colors of the connectors.
• Plug the two connector together.
4

Handle Assembly

• Release the handle locks as shown
• Rotate handle into working height position
• Return handle lock to the locking position