Energy Saver; Clock Timer; Light Sensor; Panel Protection - Sanyo DP50749 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ON-SCREEN MENU OPERATION
SETUP
(CONTINUED)

ENERGY SAVER

Energy saver settings control the LCD backlight bright-
ness to save power consumption.
The higher the level number, the more brightness
reduction and higher power saving.

CLOCK TIMER

Set the Current Time for your HDTV. You may also set
a Switch on Time to use with the On Timer Function.
When On Timer Function is set to ON, the TV will auto-
matically turn on at the previously set Switch on Time.

LIGHT SENSOR

This feature detects ambient room light brightness
and uses it to control the panel brightness and picture
parameters to reduce TV power consumption.
NOTE: When room lighting is dark, the panel brightness
and/or the picture setting parameters such as bright-
ness and cotrast are lowered. When room lighting is
bright, parameters are affected opposite.

PANEL PROTECTION

Displaying a still picture for a long time may cause an
"afterimage" or "ghost" on the screen. To help avoid
this situation, use the Picture Rotation function.
If an afterimage occurs, use the White Pattern feature
immediately to repair the panel. The more severe the
afterimage, the longer the curing process may take.
The default on-time for White Pattern is 30 minutes.
NOTE: The sooner you remove a still picture and activate
White Pattern, the more likely it is that the panel can be
repaired.
Exit the White Pattern blank screen by pressing any
button on the remote control (except VOLUME, AUDIO
or MUTE)
14
Need help?
www.sanyoctv.com
SETUP-LIGHT SENSOR SCREEN
SETUP-PANEL PROTECTION SCREEN
1-800-877-5032
ENERGY SAVER SCREEN
CLOCK TIMER SCREEN

Publicité

Table des Matières
loading

Table des Matières