Energy Saver; Clock Timer; Panel Protection - Sanyo DP42740 Manuel D'instructions

ON-SCREEN MENU OPERATION
SETUP ______________________

Energy Saver

Energy Saver settings control the LCD backlight
brightness to reduce power consumption.
• Level 1: Energy Saver feature is off.
• Level 2: Low power consumption.
• Level 3: Lowest power consumption.
Press ENTER on the desired level.
NOTE: ECO key may also be used as a shortcut to modify the
Energy Saver settings.

Clock Timer

This feature allows you to set a Current Time for your
HDTV and enable a Switch On Time for the HDTV to
turn on at a specific time of day.
When On Timer Function is set to ON, the TV will
automatically turn on at the previously set Switch on
Time.

Panel Protection

Displaying a still picture for a long time may cause an
"afterimage" or "ghost" on the screen. To help avoid
this situation, use the Picture Rotation function.
If an afterimage occurs, use the White Pattern feature
immediately to repair the panel. The more severe the
afterimage, the longer the curing process may take.
The default on-time for White Pattern is 30 minutes.
NOTE: The sooner you remove a still picture and activate
White Pattern, the more likely it is that the panel can be
repaired.
Exit the White Pattern blank screen by pressing any
button on the remote control (except VOLUME, AUDIO
or MUTE.)
12
Need help? www.sanyoctv.com 1-800-877-5032
ENERGY SAVER SCREEN
CLOCK TIMER SCREEN
PANEL PROTECTION SCREEN