CGC RYAN 544844E Manuel D'utilisation Et De Sécurité page 12

Blade and wheel Engage and disengage blade
Shifter Handles for cutting and gears for driving
Sodcutter. Refer to Figure 20.
2
FIGURE 20
1. Wheel Shifter
2. Blade Shifter
GEAR GEAR GEAR GEAR
CASE CASE CASE CASE
"DISENGAGED" "DISENGAGED"
SHIFTER HANDLE SHIFTER HANDLE
FIGURE 21
OPERATION
!
WARNING
To prevent possible bodily injury:
S Place all controls in Disengaged position.
10
All manuals and user guides at all-guides.com
1
S DO NOT operate this equipment unless you
4899
S DO NOT operate sodcutter without all guards in
S Never start or run the engine inside where ex-
S Gasoline is extremely flammable and highly ex-
"ENGAGED" "ENGAGED"
S Any warning decal that becomes illegible
SHIFTER
HANDLE
S If a malfunction should occur, cease operation
S DO NOT place hands or feet
under unit at any time.
Hands or feet can be cut or
severed by machinery.
S Operator and/or bystanders
should keep a safe distance
from all moving parts of the
Jr. Sodcutter.
have thoroughly read and completely under-
stand the controls and operating sections of
this operators/parts manual.
place. DO NOT make any adjustments or per-
form any maintenance while engine is running.
haust fumes can collect. Carbon monoxide
present in the exhaust is an odorless and deadly
gas. Provide enough fresh air to keep fumes
from getting too strong.
plosive under certain conditions. ALWAYS stop
engine and DO NOT smoke or allow open flames
or sparks when refueling.
should be replaced immediately. When replac-
ing engine, replace sound level warning decal
(Part No. 524538).
immediately. DO NOT operate sodcutter until the
condition has been corrected.
DAILY MAINTENANCE CHECK LIST
n
*Check engine oil level.
n
*Check air filter element.
n
Check engine for loose, broken, or missing
parts.
n
Check rest of machine for loose, broken, or
missing parts.
n
*Check fuel level.
* Refer to engine owners manual for oil, fuel,
and maintenance recommendations