neabot NoMo N2 Guide De L'utilisateur page 21

Care and Maintenance
Replacing Bags
When the dust bag is full, the "FULL UP" sign is keeping high brightness, and APP notice is given. Please replace the dust bag in time.
Open the cover Pull up the dust
bag through its
handle
Cleaning Dust Tunnel
If the "FULL UP" sign ,the "COLLECTING" sign and the "BATTERY"
sign all is twinkling after the dust bag is replaced, it is
recommended to pull out the power plug and reverse the
self-emptying dustbin charging pile to check whether there are
foreign matters blocking the dust tunnel.
If the dust tunnel is blocked,refer to the figure below and remove
the transparent cover of the dust tunnel with a screwdriver to
remove foreign matters.
Note: Violent disassembly is prohibited. After cleaning, replace
the cover as it is.
Throw away the Replace it with
old one a new one
18
Illustration of
correction
installation
Make sure that
the dust bag is
installed in place
Transparent cover of dust tunnel
Dust tunnel
Close the flip
cover