Cata Can Roca MT 9011 PRO BK Instructions Pour L'installation, L'utilisation, L'entretien page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
EN
power supply.
- Disconnect the oven from the power supply when not in use and before
cleaning.
- Warning: This appliance is supplied with a three core supply cord and
must be connected direct to the mains electricity supply via a omni-polar
or double pole switch having a 3mm minimum contact gap on each con-
nector.
- The fused spur should be installed in an easily reachable place so that
in case of emergency the appliance can be disconnected from power im-
mediately.
- The fixed wiring must be protected against heat surfaces.
- Do not hang any objects on the handle of the oven door.
- Caution: Do not cover the bottom of the oven with aluminium foil or other
objects. There is a risk of fire and damage to the enamel in the oven!
- Do not allow aluminium foil, plastic, paper or fabric contact with heating
elements. Never leave the appliance unattended during use, especially
when cooking with flammable substances (e.g. hot oil, fat, etc.).
- Do not store or never use harsh chemicals, sprays, flammable or non-
food in or near the oven.
- This oven is designed specifically for heating or cooking food. The use of
corrosive chemicals in heating or cleaning will damage the unit and may
cause injury.
- Should any food inside the oven catch fire, keep the door closed. Switch
the oven off and disconnect the power supply. Always exercise caution
when opening the door.
- Move to the side, and open the door slowly to vent the hot air and/or
steam. Make sure your face is away from the opening and make sure
there are no children or pets near the oven.
- Only use utensils that are suitable for use in this type of oven.
- The appliance must not be installed behind a decorative door in order to
avoid overheating.
21

Publicité

Table des Matières
loading

Table des Matières