Parts & Assembly; How To Operate - NOSTALGIA PRODUCTS Homecraft HCSB75BK Instructions Et Recettes

PARTS & ASSEMBLY
Power Indicator
Light
Temperature
Control Knob

HOW TO OPERATE

Before first use, place the hot plate on a flat, sturdy and heat-resistant surface.
NOTE: It is also recommended to turn the hot plates on the highest heat
setting and heat up for several minutes. This will burn off any residue left
from manufacture. Some odor and smoke could develop during this process,
ensure good ventilation and it should disappear after few minutes of use.
1. Place the unit on a clean, dry and level surface near an electrical outlet. Allow
about eight inches of clear space all around the exterior of the unit.
2. Make sure temperature control knob is set to the "OFF" position.
3. Plug into a grounded wall outlet.
4. Without placing anything on the hot plate, turn the temperature
control knob to "HIGH" for 3-5 minutes to preheat.
5. For most efficient operation, select a pot or pan that has a
bottom diameter that fits the heating plate.
6. Place the pot or pan onto the hot plate and use the temperature
guide below to cook the food as instructed by the recipe.
7. After cooking is finished, turn the temperature control knob to the "OFF" position.
5
Heating Element
Hot Plate Body
Non-skid feet