Let's Talk Technical; Cleaning The Brushroll - Hoover air Lift LIGHT Mode D'emploi

Let's talk technical

Any other servicing should be done by an authorized service representative. If appliance
is not working as it should, has been dropped, damaged, left outdoors, or dropped into
water, take it to a service center prior to continuing use.
IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or
troubleshooting checks. If the brushroll has been obstructed, the Motor Protection Sensor may
have been activated.

Cleaning the brushroll

CAUTION: To reduce the risk of injury from moving parts - unplug before servicing.
Flip vacuum over.
See us do it:
Hoover.com/video-instruction-guide
Remove the 6
screws with a Phillips
screwdriver.
Rotate bottom plate
off.
Pull out the brushroll
and remove debris.