Slackers NINJA WHEEL Mode D'emploi page 3

3. ATTACHING THE NINJA WHEEL:
The safety carabiners must be threaded into the loops of the Ninjaline webbing BEFORE tensioning the
NINJALINE.
Attachment to a Ninjaline:
• Attach the NINJA WHEEL to the loops of the Ninjaline with delta safety carabiners.
• ONLY use with slackers Ninjaline, otherwise there is a risk of injury.
• WARNING! CRUSHING HAZARD!
4. MANDATORY STRESS TEST
Before using the NINJA WHEEL, you must do the following:
Step 1:
Keep the course clear - spectators must keep a safety
distance of at least 3 m from the NINJA WHEEL.
Step 2:
Check equipment: carefully inspect the NINJA WHEEL for
wear, damage, and wear.
Step 3:
• MANDATORY LOAD TEST - Test your installation by
placing a 150 kg weight on the NINJA WHEEL.
WARNING! If you hear acoustic or visual signs of
damage (tearing noises, fraying, etc.) during the test,
stop the test. Either choose a different location or
replace damaged parts.
WARNING!
Do not secure or use a tree
or branch that is sick,
infested, or damaged.
Such a tree could fail and
cause serious injury or death.
150 KG
350 lbs