Control Knob; Daily Use; Ignition Of The Burner - Electrolux RGG6741 Notice D'utilisation

8 www.electrolux.com

3.2 Control knob

Symbol

4. DAILY USE

WARNING!
Refer to Safety chapters.
4.1 Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple

4.2 Ignition of the burner

Always light the burner
before you put on the
cookware.
WARNING!
Be very careful when you
use open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
All manuals and user guides at all-guides.com
Description
no gas supply / off posi‐
tion
maximum gas supply
Symbol
1. Push and hold the spark generator
button.
2. At the same time push the control
knob down and turn it
counterclockwise to the maximum
gas supply position (
3. Release the spark generator button
when burner lights but keep the
control knob on this position for equal
or less than 10 seconds; this will let
A
thermocouple to warm up. If not, the
gas supply will be interrupted.
4. Adjust the flame after it is regular.
B
If after some tries the burner
does not light, check if the
crown and its cap are in
C
correct positions.
D
WARNING!
Do not keep the control knob
pushed for more than 15
seconds. If the burner does
not light after 15 seconds,
release the control knob,
turn it into off position and try
to light the burner again after
minimum 1 minute.
Description
minimum gas supply
ignition
).