Charging Battery - Trevi FLEX 50 GS Guide De L'utilisateur

- To reject a call.
- Power Off: Long press to
power off under standby mode;
- Power On: Long press to
power on if the phone is
power off;
- Press this key to go back to
standby screen.
13. Press this button:
- To scroll the options when
browsing a function list.
- In edit state, press these
keys to navigate.

CHARGING BATTERY

CHARGING THROUGH POWER SUPPLY:
1. Turned off the device, connect the Micro USB plug of the supplied
cable to the Micro USB phone (to use the supplied cable only).
2. Connect the USB outlet on the same power supply cable and plug
the latter to a standard wall outlet.
3. The device will turn on for a few seconds to show the battery icon
with it is charging.
4. When the battery is fully charged (the icon is no longer moving),
disconnect the power supply from the wall outlet and then disconnect
the plug from the Micro USB phone.
CHARGING THROUGH COMPUTER:
You can also charge your phone by plugging it into a USB port of a
computer using, simply, the supplied USB cable.
Notes:
• Use only the mains adapter supplied, different power supplies may
damage the battery.
- Under standby mode, press UP
key to enter the specified
function page.
- You can also customize
direction keys to match the
desired functions.
14. Camera.
15. SOS dialing.
16. Micro USB socket for charge
and Earphone.
17. Speaker.
18. Tourch Led.