Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Status icons
Description
Heating mode: the controller operates in Winter mode.
Cooling mode: the controller operates in Summer mode.
Dead band zone: temperature interval in which the controller
is not operating neither in Winter nor in Summer mode.
Fan mode: the controller operates in ventilation mode only.
Continuous fan mode: by reaching the setpoint,
the ventilation proceeds at low speed.
Anti-frost function: the heating valve opens if the room
temperature reaches the minimum set value
(with console in position OFF).
Destratification function: the fan runs to avoid stratification
of the air (i.e. with air sensor at the air intake of the unit).
Economy mode: energy saving by shifting the setpoint.
Electric heater active: the electric heater is energized.
Valve active: the regulating valve is energized.
Forced ventilation: ventilation is forced by a contact
(i.e., in case of operation with electric heater).
Service tool - I/O status: reading of input-output states.
Lock buttons mode: deactivation/activation of the buttons
on the remote console.
Service tool – Parameters: reading/writing of the OPower
parameters.
30 /92
Publicité
Table des Matières
