Power Supply - Westinghouse WSHUT02 Manuel D'instructions

24. Do not use the heater in a bathroom, laundry, humid
environment, or near to a body of water such as a swimming
pool. Maintain a distance of at least 5 feet away from water. Do
not immerse the appliance in water or any other liquid or place
it under running water (see CLEANING AND CARE).
25. Keep the heater clean. Do not allow objects to enter the air
vents as this may cause an electric shock, fire, or damage.
26. The use of accessories or fittings other than the original parts
supplied with this appliance may result in an injury, fire or
damages and will void the warranty.
27. Do not under any circumstances attempt to open, dismantle,
or repair the appliance. For servicing and repairs, contact the
retail outlet, the manufacturer, or an authorized service center.
28. Make sure no small piece of packaging, such as polystyrene,
has been left on or fallen into the air inlets or outlets.
29. RISK OF SUFFOCATION! KEEP OUT OF REACH CHILDREN
- Keep all packaging materials out of the reach of babies and
children.

POWER SUPPLY

1. Before first use, make sure the power voltage matches the
information on the appliance rating label.
2. Only connect the appliance to an earthed wall socket.
3. To avoid a fire or electric shock, plug the unit directly into a
120V AC electrical outlet.
4. A short power cord (or detachable power cord) should be used
to reduce the risk of becoming entangled in or tripping over
the cord.
5. Always plug the appliance directly into the wall socket. Do not
use multi-plugs, adapters, or extension cords.
6. Always fully unwind the power cord before using the appliance.
7. Do not twist the power cord.
8. Check there are no heavy items on the power cord, including
carpets.
9. Make sure there is no pressure on the cord where it connects to
the heater.
EN
6
SAFETY INFORMATION