Using The Fan; Using The Heater - Westinghouse WSHUT02 Manuel D'instructions

5. Check the heater's rating plate matches the mains socket
voltage. Connect the heater to the mains power supply.

USING THE FAN

1. Turn the THERMOSTAT knob (5) clockwise to the highest
setting
2. Turn the FUNCTION knob (4) to the
NOTE: There is no heat when you use the fan.

USING THE HEATER

1. Select the heater power level by turning the FUNCTION
knob (4) to the desired setting:
Low – 750W
High – 1500W
2. Turn the THERMOSTAT knob (5) clockwise towards the highest
setting
towards the lowest setting
NOTE: When turning the THERMOSTAT knob (5) up, the
clicking sound means that the thermostat is starting to work,
and the desired function is activated. Similarly, when turning
the THERMOSTAT knob (5) down, the click indicates that the
thermostat has turned off and the function is deactivated.
3. To set the temperature, turn the THERMOSTAT knob (5)
to the highest setting
is comfortable, slowly turn the THERMOSTAT knob (5)
counterclockwise until you hear the heater turn off and the
indicator light turns off. The thermostat has now recorded your
optimum room temperature and the heater will turn on and off
to maintain the room at that level. To change the setting, simply
adjust the temperature or function to override the previous
setting.
EN
10
HOW TO USE
. The indicator light will turn on.
to increase the temperature and counterclockwise
. When the room temperature
position.
to decrease the temperature.