Mounting Instructions - Axis T8121 Guide D'installation

High PoE Midspan and Splitters Installation Guide

Mounting instructions

The AXIS T8121 may be wall or bench mounted using the rear side holes.
Note the following before mounting the AXIS T8121 to a fixed location:
• Do not cover the midspan or block the airflow to the product with any foreign object. Keep
the midspan away from excessive heat and humidity, and free from vibration and dust.
• Ensure that the cable length from the Ethernet network source to your Axis video product
does not exceed 100 meters (333 feet). The midspan is not a repeater and does not amplify
the Ethernet data signal.
• Use a splitter if desired; ensure that the splitter is connected close to your Axis video prod-
uct and not to the Midspan.
• There is no "on-off" switch; simply plug the AXIS T8121 into an AC power outlet.
To mount:
1. Install two screws vertically at a distance of 9.17 cm (3.61") on the wall or shelf.
2. Align the AXIS T8121 mounting slots to capture
the surface screws.
A 5.8 to 7.0 mm (0.23" to 0.27")
B 2.0mm (0.08")
C 1.5mm to 2.5 mm (0.059" to
0.098")
D 3.0 mm (0.12")
A
B
C
D
Page 7