Axis T8121 Guide D'installation page 4

Page 4
Installation
1. Connect the AXIS T8121 to an AC outlet (100-240 VAC), using a standard power cable.
2. Connect the unit Data In jack (input) to your remote Ethernet network switch using an Ethernet
cable.
3. Connect the Data & Power Out jack (output) to your Axis splitter or camera, using an Ethernet
cable.
Port connectivity
indicator
AC Input connectivity
indicator
Indicators
LED
Green
Green blinking
High PoE Midspan and Splitters Installation Guide
Data and Power out
Output port
Camera/splitters
AC (Main)
Indicates that the power is on
(power is active)
Output voltage is out of range
Data in
Input port
Ethernet
Port
Indicates that a remote terminal is con-
nected.
Overload or short circuit