Baninni ROADTRIP Mode D'emploi page 23

Fitting the bosoter seat without backrest using the seat belt
Step 1. Place the booster seat on the seat of the car ensuring it is firmlu against the
backrest of the carseat.
Step 2. Place the child in the booster seat.
Step 3. Fasten seat belt, making sure that the lap belt webbing goes under both
armrests and the diagonal belt webbing goes under the armrest neat the buckle;.
Check that the webbing has not become twisted and tighten the seat belt by pullin the
diagonal strap upwards.
Step 4. Check the seat belt to ensure there is no slack and the belt is not twisted.
Notice: The vehicle seat buckle is not positioned in or in front of the specified
(labelled) belt guide of the child restraint system.Make sure the seat belt has not
become twisted. Also check that the cover is not impending the movement or fit
of the seat belt webbing in any way. To release your child seat follow the above
instructions in reverse order.
All manuals and user guides at all-guides.com
(ca 3years until 11years)
The satisfactory position of the adult safety
belt buckle is relative tho the child car seat
as in the figure. You can contact the retailer
if in doubt.
22-36kg