Trimming hair
• Make sure that the trimmer is turned off.
• To maintain sharpness, remove hair trimmings between usages.
Trimming to an even length
1
1
Attach the comb attachment for hair to the
main body. (See page 11.)
2
2
Set the trimming height.
3
3
Holding the trimmer with the power switch
upward, trim by moving the trimmer slowly
against the flow of hair and toward the crown of
your head.
4
4
Trim slowly while
crisscrossing from
various directions to
avoid missing any spots.
14
Adjusting the length around the ears
and neckline
1
1
Attach the comb attachment for hair to the
main body. (See page 11.)
2
2
Set the trimming height.
3
3
Holding the trimmer with the
power switch upward, trim
around the ears and neckline
(
) by lifting the tip of
the comb attachment little by
little from the hairline.
• When trimming the entire area to 12 mm, use 9 mm as a
rough standard trimming height for the neckline.
• When trimming the entire area to 9 mm, use 6 mm as a
rough standard trimming height for the neckline.
Trimming the downy hair around the neckline
1
1
Remove the comb attachment.
2
2
Holding the trimmer with the
power switch at the bottom,
touching the blade
perpendicular to the area of
downy hair, and move the
trimmer downward along the
skin.
• It is recommended to ask someone else to trim around your own
ears and neckline.
90°