Ribimex RIBITECH PRCOMP1/KIT Manuel D'instructions Et D'utilisation page 17

4.6- To connect and disconnect accessories to/from hose (lever coupler)
Accessories [b] to [f] can be connected to the lever connector (13).
To connect: with your thumb press down the lever on the connector (13) and insert the threaded end of the
desired accessory into the connector. Release the lever; and check that the accessory is held firmly.
To disconnect: with your thumb press down the lever on the connector (13) and pull on the accessory to
extract it.
NOTE: To use the nozzles (16), you first need to connect the adapter (f) to the lever connector (13) and then
fit the desired nozzle.
4.7- Starting and Stopping (ON/OFF switching)
The switch is located on the front of the machine.
To start the machine: press the switch to position [I].
To stop the machine: press the switch to position [0].
Page 17 / 31