Configuration Of New Device; Connect To Wi-Fi Network; Connect To Bluetooth; Screen And Display - AGPtek T02S Mode D'emploi

Notes
1. After the device is operated for a long time,
especially in a high temperature environment, it is a
normal phenomenon that the surface might be hot.
When you feel it is hot, please stop charging, turn
off some functions as well as moving the device to a
cool place. Avoid prolonged contact with hot
surface.
2. If you do not use the device for a long time, please
charge and discharge it at least once a month to
prevent damage caused by excessive battery
consumption.
[Recommendation]: In order to ensure the smooth and
long-term use of this product, it is recommended that
you buy a special charger for digital products.

Configuration Of New Device

Connect To Wi-Fi Network

1. Swipe down from the status bar to open the
notifications bar or find "Wi-Fi" in Settings.
2. Turn on the"Wi-Fi"switch and the system will list
all detected WiFi network.
3. Tap the Wi-Fi network you want to connect to. If you
select an encrypted network, you will need to enter
password for access connection.

Connect To Bluetooth

1. Swipe down from the status bar to open the
notifications panel or find "Bluetooth" in Settings.
2. Turn on the "Bluetooth" switch. Enter the Bluetooth
settings interface and search for Bluetooth address.
3. Tap the name of the Bluetooth address you want to
connect to and perform a pairing connection.

Screen And Display

3