Overheating Protection; Technical Data - HAEGER DF-4SS-014A Mode D'emploi

Overheating Protection

•
If you should accidentally switch on your deep fat fryer when there is no oil or fat
in it the overheating protection is automatically turned on. The appliance is no
longer ready to be used. Unplug the deep fryer.
•
Only after the device has been left to cool down completely should the RESTART
button on the rear of the control element be operated to use the deep fat fryer
again.
Restarting the over-temperature protection
If the overheating protection is automatically turned on, the appliance is no longer
ready to be used. To restart:
1. Unplug the deep fryer from the power socket.
2. Press the RESTART button.
3. Plug the deep fryer back into the power socket.
4. Check if the power light is burning again.

Technical data:

Models: .......................................... DF-4SS.014A
Power supply: ................................. 220-240V~, 50/60Hz
Power consumption: ...................... 2000W
Protection class: ............................. Ι
Maximum filling quantity: .............. 4 Litres
Conformity
This product has been tested and produced according to all relevant current CE
guidelines, such as:
-
electromagnetic compatibility Directive 2014/30/EU,
-
Low voltage Directive (LVD) Directive 2014/35/EU,
-
RoHS with its amendments Directive 2011/65/EU,
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives.
Instructions Manual
English
7