Harbor Breeze 35086 Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS
7. Once wiring step has been completed, slide the
wired remote receiver in between the bracket (A)
and the top of the downrod ball (D) with the flat side
of the receiver facing the ceiling. Turn lead wires
upward and carefully push them into the outlet box,
with the white and green wires to one side of the box
and the black wire toward the other side.
8
8. Loosen one shoulder screw (U) then totally remove the second shoulder screw (U) from hanger
bracket (A). Assemble canopy (G) by rotating keyhole slot in canopy over shoulder screws (U) in
hanger bracket (A). Tighten shoulder screws (U). Securely attach and tighten the canopy hole
cover (H) over the shoulder screws (U) in the hanger bracket (A) utilizing the keyhole slot
twist-lock feature.
7
U
8
A
D
G
H
Lowes.com/harborbreeze