3. Logout
Press « Logout » to exit from manager.
7.4 Battery configuration
The settings may vary depending on the battery technology that is in use (Lead or Lithium). Proceed
as follows:
7.4.1 Lithium Batteries
Refer to the manufacturer's battery documentation if necessary.
1. In the « Installer » mode, go to the « Manager / Battery » tab.
2. Select the correct battery type, and press OK. The message « Starting battery manager »
appears. On some batteries, the message can disappear very quickly.
3. The message « Detecting battery in progress » appears.
Manuel d'installation / Installation guide IMEON 9.12 – Rev A.8
IMEON 9.12
FR
FR
EN
127