Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
Rotate the door assembly 180º, exchange the position of the upper
sleeve (2) and the shaft plug (1), and move the door stopper (5) and the
lower sleeve (6) from the lower right to the lower left.
3
Assemble the sleeves, the shaft hole cap, the stopper and the switch
block. Install the door on the cabinet.
(The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor.)
18
V.2
Publicité
Table des Matières
