Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION OF THE CABINETS
Single module:
* To facilitate handling, remove the cabinet doors and drawers (see p.34).
1.
Insert the cabinet into the opening and position it according to the desired depth, when the front facades
and final siding are in place.
2. Attach the cabinet to the structure (6 screws – not included – 3 on each side depending on the material used).
3. Replace the doors or drawers (not illustrated).
1
Panel
Final siding
2
Not included
Front
facade
Top view
6x
Module
29
Publicité
Chapitres
Table des Matières
