Nicols PAR COB 90 RGB Notice D'utilisation page 13

DMX mode 3: 7CH
CHANNELS NUMBER
1 0-255
2 0-255
3 0-255
4 0-255
0--24
25-49
50-74
75-99
5
100-124
125-149
150-174
175-199
200-255
6
0-255
0-19
7
0-255
6. MASTER/SLAVE MODE
Press "MODE" until the LED display shows SLA
-If the host signal (Master) is not received, the LED is off. If the host signal (Master) is received, it
will follow the host operation.
7. RESTORE FACTORY SETTINGS
Press "MODE" until the LED display shows
a) Press "MODE" for a long time until the LED display shows
"UP" to restore the factory settings.
b) When the fixture doesn't start normally, press "MODE" + "UP" a long time until the LED
r St
display shows
DMX mode function of 7CH
BUILT-IN PROGRAMS SPEED, THE GERATER VALLUE, THE HIGHER SPEED
STROBE FREQUENCY, THE GREATER VALUE, THE HIGHER FREQUENCY
and flashes. Release the buttons to restore factory settings.
FUNCTION
MASTER DIMMING
R 0-100%
G 0-100%
B 0-100%
NO FUNCTION
AUTO RUNNIG BUITL-IN PROGRAMS
BUILT-IN PROGRAMS 2
BUILT-IN PROGRAMS 3
BUILT-IN PROGRAMS 4
BUILT-IN PROGRAMS 5
BUILT-IN PROGRAMS 6
BUILT-IN PROGRAMS 7
SOUND-ACTIVE
OF SOUND-ACTIVE
LED NO STROBE
.
r St
, release the button. Press