MAIN FONCTIONS
1. AUTO RUNNING MODE
Press "Mode" until the LED display shows
-
. The user can set their running speed and strobe speed via the Built-in Programs (see
below)
2. BUILT-IN PROGRAMS
Press "MODE" until the LED display shows
a) Press a few seconds on "MODE" to select
select the color. Press "MODE" to go back to the previous menu.
b) Press a few seconds on "MODE" until the LED display shows a signal starting with
Release the button. Use buttons "UP" or "DOWN" to select the strobe speed
Press "MODE" to go back to the previous menu.
Press "MODE" until the LED display shows a program between
Speed + Strobe Speed
a) Press a few seconds on "MODE" until the LED display shows a signal starting with
the button. Use buttons "UP" or "DOWN" to select the running speed of the built-in
5.01-5.FL
programs
b) Press a few seconds on "MODE" until the LED display shows a signal starting with
Release the button. Use buttons "UP" or "DOWN" to set the strobe speed:
"MODE" to go back to the previous menu.
3. DIMMING MODE
Press "MODE" until the LED display shows
a) Press a few seconds on « MODE » until it shows a signal starting with
Use buttons "UP" or "DOWN" to adjust the brightness of LED Red
b) Press a few seconds on « MODE » until it shows a signal starting with
Use buttons "UP" or "DOWN" to adjust the brightness of LED Green
c) Press a few seconds on « MODE » until it shows a signal starting with
Use buttons "UP" or "DOWN" to adjust the brightness of LED Blue
d) Press a few seconds on « MODE » until it shows a signal starting with
Use buttons "UP" or "DOWN" to adjust the strobe speed
. The fixture will auto run six built-in programs
Pr. 1
Static Color
. Press "MODE" to go back to the previous menu.
. Menus: Static Color + Strobe Speed
and use buttons "UP" or "DOWN" to
PR.2 – PR.7
F.00-F.99
F
.
F.00-F.99
.
. Menus: Running
5
. Release
F
.
F.00-F.99
. Press
r
. Release the button.
r.00-r.FL
9
. Release the button.
9.00-9.FL
b
. Release the button.
b.00-b.FL
F
. Release the button.
.