Télécharger Imprimer la page

Nicols PAR COB 90 RGB Notice D'utilisation page 12

Publicité

Les langues disponibles

Les langues disponibles

4. SOUND ACTIVE MODE
Press "MODE" until the LED display shows
Press a few seconds on "MODE" until it shows a signal starting with
buttons "UP" or "DOWN" to adjust the sensitivity from
previous menu.
5. DMX MODE
Press "MODE" until the LED display shows
The fixture can automatically identify the DMX signal. If the signal is well received, the third digit of
LED display will flash. If the DMX signal disappears, the previous mode will be restored.
a) Press a few seconds on "MODE", when the LED display shows
button. Use "UP" or "DOWN" to adjust the DMX address. Press "MODE" to go back to
the previous menu
b) Press a few seconds on "MODE", when the LED display shows a signal ending with
release the button. Use "UP" or "DOWN" to adjust current DMX mode. Press "MODE"
to go back to the previous menu
DMX mode 1: 3CH
CHANNELS
NUMBER
1
0-255
2
0-255
3
0-255
DMX mode 2: 6CH
CHANNELS
NUMBER
1
0-255
2
0-255
3
0-255
4
0-255
0--10
5
11-255
0--19
6
20-255
0--255
DMX mode function of 3CH
DMX mode function of 6
CH
STROBE(1CH-4CH SELECT COLOR STROBE), THE GREATER VALUE, THE
5
. Release the button. Use
. Press "MODE" to go back to the
0-31
FUNCTION
R 0-100%
G 0-100%
B 0-100%
FUNCTION
MASTER DIMMING
R
0-100%
G 0-100%
B
0-100%
NO FUNCTION
SOUND-ACTIVE
LED NO STROBE
HIGHER STROBE FREQUENCY
SOUND-ACTIVE SENSITIVITY
001-255
, release the
CH
,

Publicité

loading