Publicité
Les langues disponibles
Les langues disponibles
CONNECTION :
37. DIN SOCKET
These sockets are used to connect the remote control to
the main unit. Use the Mini-din cable to connect it.
38. START REMOTE CONTROL
These sockets are to connect to a mixer using a 3.5mm
jack plug to give start capability. When the switch contacts
are shorted, the respective unit play, and similarly when
the switch contact are open, the player will be in pause
mode
39. LINE OUT OUTPUT
The audio for each CD player is an output for these jacks.
Connect to the line input of the mixer.
40. DIGITAL OUTPUT
These jacks are digital outputs for each CD players.
Connect to the line input of the D/A Amplifier.
41. POWER SUPPLY SELECTOR
Used this selector to choose the good Power supply. (
several countries have another power supply )
42. POWER SUPPLY SOCKET
Used to connect the AC mains power to the unit.
FUNCTIONS :
Opening & closing the disc holder.
-
Switch the unit on. Push the OPEN /
CLOSE button to open the disc holder.
-
You can't open the disc holder when the
unit is reading ( to avoid the read trouble ).
Push the START / PAUSE before pushing
the OPEN / CLOSE button.
Loading discs
-
Take the disc by each sides and put it on
the disc holder, then push the OPEN /
CLOSE button to close the dic holder. The
number of tracks of the disc is displayed
and the total time disc during 2 seconds.
The CUE point is automatically fixed at the
starting point of the first track.
Note :
Don't place objet or more than one disc on
-
disc holder.
-
Don't push the disc holder with your finger.
It would damage it.
-
Selecting tracks.
Press SKIP button once to move to one
-
higher or lower track.
Hold the SKIP button to change tracks
-
continuously at a higher speed.
-
When a new track is selected during the
playback, plaback begins as soon as the
skip search operation is completed.
-
If the SKIP >>I button is pressed while the
last track is playing, the first track is
selected. In the same way, if the SKIP I<<
button is pressed while the first track is
playing, the last track is selected.
Starting playback.
-
Press the PLAY / PAUSE button during
the pause or CUE condition to start
playback, the play indicator lights.
The point at which playback starts is
-
automatically stored in the memory as the
CUE point. The pickup then returns to the
CUE point when the CUE button is
pressed. ( Back CUE ).
9
Publicité
