Information And Recommendations - Eden accessIT OUTFX V2-AI Notice Technique

OUTFX V2-AI – Notice technique / Technical Manual

Information and recommendations

o In accordance with the European directive UTE C00-200 describing the directives 89/336 EEC and
92/31 EEC, OUTFX V2-AI complies with the following standards:
 NF EN 50081-1 for electromagnetic emissions and
 NF EN 50082-1 for electromagnetic susceptibility.
o Wiring recommendations: the cables used to connect the drives, network and other devices must be
installed according to the instructions describing Level 2 (protected environment) of the standard NF
EN 61000-4-4.
o This product must be installed by a qualified contractor. Incorrect installation and use are liable to
cause an electric shock or fire hazard. Before conducting the installation, read the technical manual
and follow the product assembly recommendations.
o After switching off the power supply, all the internal capacitors will discharge at a healthy level
after 60 seconds under normal conditions. However, in the event of a fault, the charging may be
maintained for a much longer time and suitable precautions must be taken before handling the
product.
Our technical support is available Monday to Friday
from 9 am to 12 pm and from 2 pm to 6 pm
(5 pm on Fridays)
 +33 (0)4 42 54 58 57
 hotline@tech-eden.com
p.12/18