Publicité
Les langues disponibles
Les langues disponibles
EN Operating instructions
42
12 Laser receiver COMMANDER 2 H2N/H2N+
12.1 Displays and controls of the laser receiver
Display lights up: limited remaining life
1
(battery approx. 5h / rechargeable approx. 0,5h)
Lights up if the laser line is within the sensor win-
2
dow but below the zero line. In addition, the red
LED next to the reception field lights up and also a
Lights up if the laser line is located at the level of
3
the zero line. In addition, the green LED next to
the reception field lights up and a
Lights up if the laser line is within the sensor
4
window but above the zero line. In addition, the
yellow LED next to the reception field lights up and
LCD display DETECTOR FIELD RESOLUTION
5
Displays the currently set resolution:
4=±4mm / 2=±2mm / 1=±1mm / 0=±0.5mm
LCD display ACOUSTIC SIGNAL
Display = acoustic signal loud/
6
Display = acoustic signal quiet/
No Display = acoustic signal off
7
To toggle between units, press buttons 9+11
8
Shows the distance to the reference / zero marking
Button DETECTOR FIELD RESOLUTION
7
Switches the resolution between
±4mm / ±2mm / ±1mm / ±0.5mm.
Button ACOUSTIC SIGNAL
8
Switches the acoustic signal between
9
Switches the receiver on and off.
LCD display BATTERY
LCD display LOWER
slow melody sounds.
LCD display TARGET
continuous melody sounds.
LCD Display HIGHER
also a fast melody sounds.
LCD display „mm/in"
Shows the selected unit.
simultaneously
LCD display "height"
loud/quiet/off.
Button ON/OFF
1
2
3
4
5
6
8
7
(2)
(3)
(4)
9
10
11
Publicité
