Installing The Tv To The Wall; Removing The Screws From The Rear Of The Tv (Except Xbr-55X890C, Xbr-55X850C, Xbr-49/43X830C) - Sony BRAVIA Série Manuel De Référence

Installing the TV to the Wall

This TV's instruction manual only shows the steps on preparing the installation of the TV
before installing to the wall.
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box
as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the
Table-Top Stand; see page 22 (Detaching the Table-Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing this TV, especially to determine the
strength of the wall for withstanding the TV's weight.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount
Bracket thickness. Please see below illustration.
8 mm - 12 mm
Screw
Wall-Mount Bracket
TV's rear cover
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are
ready to attach the Table-Top Stand. Keep the screws away from small children.
Note
• Read the supplied Safety Booklet for additional safety information.
Removing the screws from the rear of the TV (except XBR-55X890C,
XBR-55X850C, XBR-49/43X830C)
US
21
US