Télécharger Imprimer la page

Kalorik WM 40423 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

Fax +1 305 430 9692
16. When using this appliance, provide adequate airspace above
and on all sides for air circulation. On surfaces where heat may
cause a problem, an insulated hot pad is recommended.
17. Do not leave unit unattended during use.
18. Always use the product on a clean, flat, hard, dry surface. There
should be no material such as a tablecloth or plastic between
the unit and surface. A fire may occur if sandwich maker is
covered or touching flammable material, including curtains,
draperies, walls, and the like, when in operation.
19. It is absolutely necessary to keep this appliance clean at all times
as it comes into direct contact with food.
20. Be careful not to scratch the non-stick coating of the cooking
plate, as you might get little pieces of this coating into the food. If
scraping is necessary, unplug the appliance and use a classical
wooden spatula or a heat resistant plastic one.
21. DO NOT touch the cover during use. HOT SURFACE!
22. Never impact this unit or drop from high place.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
3
Assembly page 3/28
special
instruction
from
Team
Print only
WM 40423 - 120501

Publicité

loading