Kemper 104997 Notice De Montage Et D'utilisation page 14

DT Istr 104997 – 10/2014 - Rev 4 11//2017
2. Position the cartridge-connecting lever on the "UNLOCK" position.
3. Wait for the plate to cool before storing it.
4. In case of long periods of non-use of the product, it is compulsory to take the cartridge out of the appliance.
7. This unit can be kept inside only if the cartridge has been disconnected and removed from the appliance. If you expect that the
barbeque remains unused for a certain period of time, store it in its original packaging and in an environment free from dust.
Changing the cartridge
1. Ensure that the cartridge is empty before replacing it (shake it in order to hear the sound produced by the liquid).
2. Replace the cartridge outside and away from other people.
3. Ensure that the appliance is switched off before you remove the cartridge.
4. Make sure that the tap of the hot plate is CLOSED. Tap on OFF position (clockwise rotation).
5. Check that the cartridge connection lever is on the "UNLOCK" position.
6. Open the cartridge holder lid and take out the cartridge.
7. Check that the seals are in a good state of maintenance.
8. Put the cartridge in its housing placing the cut on the cartridge's neck in correspondence to the safety stop.
9. Position the connecting lever on the "LOCK" position.
CLEANING AND MAINTENANCE
Clean your equipment after EVERY USE. Do not use abrasive or flammable detergents, which may damage the components of the
unit and may cause a fire. Clean with a solution of warm water and soap.
NEVER USE THE PRODUCTS FOR OVEN CLEANING. CAUTION: All cleaning and maintenance operations, should be made
when the unit is cold and after removing the cartridge.
EXTERNAL SURFACE: wash with a soft cloth and a solution of warm water and soap. Rinse with water. Do not use abrasive
cleaners, degreasers or concentrated products for cleaning of barbecues.
Use a solution of gentle detergent or baking soda and hot water. In case of stubborn stains, use a non-abrasive detergent powder and
then rinse with water.
BOTTOM OF THE BARBECUE DRIP: the tray should be cleaned after each use in order to prevent that accumulation of grease
can ignite causing a flash fire. Remove residuals with a brush, a scraper and / or a sponge and then wash with a solution of water and
soap. Rinse with water and let dry.
PLASTIC SURFACES: wash with a soft cloth and a solution of warm water and soap. Rinse with water. Do not use on plastic
surfaces abrasive cleaners, degreasers or concentrated products for barbecue cleaning.
WIRE RACK: use a mild solution of soap and water. In case of stubborn stains, use a non-abrasive detergent powder and then wash
with water.
The producer will not answer for damages to things or persons coming from the non-correct use or non-correspondent to these
instructions. The guarantee is of two years from the date of purchase of the goods and only in the case in which the product has not
been tampered, has not been damaged and has not fallen. The product must be accompanied by the buying receipt showing the date of
purchase. In case of damages due to an incorrect use of the product, the warranty will not be valid.
14