Using As A Table & Chair - Stage 3; Removing The Restraint System Assembly; Seat Pad - Evenflo Convertible High Chair 3-in-1 Manuel D'instructions

Using as Table & Chair – Stage 3
1
For children who are walking age and no
more than 50 lbs (22.6 kg).
B
A
A
C
2
When using as a table and chair, remove the restraint
system assembly from the chair (page 11), but keep for
possible future use.
10
Remove tray (page 6),
then remove the baby
from the high chair.
Press the lock
A
releases on the four
A
top corners of the table
and remove the chair
A
assembly from the
B
table .
C
Removing the Restraint System Assembly &
Note: Remove the seat pad cover from the chair back
(see page 6).
1
A
D
From the back of the chair back
anchor on one of the shoulder straps through the
B
slot in the chair back and through the corresponding
C
slot in the seat pad on the front of the high chair.
Repeat with the other shoulder strap.
Repeat this step with both waist straps' restraint anchors
on the chair base .
B D
2
G
H
E
F
From underneath the seat of the chair base
restraint anchor on the center waist restraint strap
F
up through the slot
G H
corresponding slot in the seat pad.
Remove the waist restraint and seat pad.
Note: To install the waist restraint and seat pad, reverse
the removal steps. Pull on each strap to make sure it is
installed securely.

Seat Pad

B
B
C
B
, push the restraint
A
H
F
, push the
E
in the seat and through the
11