Connecting Using An Hdmi Cable - Samsung Harman Kardon HW-N950 Mode D'emploi

NOTE
• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.
Configuring Dolby Atmos® on your BD player or other device.
• Open the audio output options on the settings menu of your BD player or other device and make
sure that "No Encoding" is selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
• Dolby Atmos® works only on 7.1.4 channels.
• Make sure that the content supports Dolby Atmos®.

Connecting using an HDMI Cable

External Device
1. Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the bottom of the Soundbar to the
HDMI OUT jack on your digital device.
2. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the bottom of the Soundbar to the
HDMI IN jack on your TV.
3. Press the (Source) button on the top panel or on the remote control, and then select
"HDMI 1" or "HDMI 2".
4. "HDMI 1" or "HDMI 2" mode is displayed on the Soundbar display panel and sound plays.
Top of the Soundbar
HDMI Cable

HDMI OUT
HDMI IN
HDMI Cable
(ARC)
ENG - 15
DIGITAL AUDIO IN
(OPTICAL)
HDMI IN 1
OR
HDMI IN 2

HDMI OUT
(TV-ARC)
Bottom of the Soundbar
HDMI 1
OR
HDMI 2