Würth ETS 150-E Compact Traduction Des Instructions De Service D'origine page 8

OBJ_BUCH-0000000294-001.book Page 8 Monday, February 12, 2018 1:51 PM
Read all safety warnings and
all instructions. Failure to follow
the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
The machine must not be damp
and must also not be operated in
damp suroundings.
 In case of excessive noise or vibrations during oper-
ation, switch the machine off and check it for dam-
age. Replace worn or faulty components. If the
noise or vibrations continue, take the machine in for
repair.
 Before using, check the sanding disc and the acces-
sories for damage. Replace damaged material.
Intended Use
This hand-guided orbit sander is intended for commer-
cial use in industry and trade. It is suitable for sanding
metal, wood, stone, plastics and other materials. The
sanding disc and the sanding plate should correspond
with the technical specifications (speed, weight, size).
Other use, unsuitable sanding means or other accesso-
ries may lead to problems.
For damage caused by usage other than intended, the
user is responsible.
For Your Safety
Safety Warnings for Sanders
 Wear ear protectors. Exposure to noise can
cause hearing loss.
 Follow the instructions for mounting the sanding
sheet and the sanding plate.
 Never manually rotate the sanding plate and never
accidentally start the machine.
 Do not direct the power tool against yourself, other
persons or animals.
 Use only original Würth accessories.
Random orbital sander
Article number
Rated voltage
Rated power input
Rated speed
1. speed range
2. speed range
3. speed range
4. speed range
Orbit diameter
Sanding plate diameter
Weight
Class of protection
Working safely with this product
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strictly
followed.
Tool Specifications
0702 124 0
0 – 7000 rpm
0 – 9000 rpm
0 – 10000 rpm
ETS 150-E
Compact
220 V
150 W
4000 rpm
5 mm
152 mm
1.21 kg
I
8