Publicité
Les langues disponibles
Les langues disponibles
3D Eversion instructions When you are familiar with basic
operation, you can do some awesome & exciting tricks an
stunts! First of all, fly the aircraft to a height of more than 3 meters,
press the 3D Eversion switch on the rear right
side of the transmitter, then push the right rudder (in any direction)
to make 360-degree flip.
Wind Blade Installation
• Install the fan blades on the motor shaft. (Ignore if installed)
• The arm logo must be the same as the wind blade logo. A blade
should be aligned with A motor and B blade should be aligned
with B motor.
WIFI app download
See the software for instructions:
Publicité
