MOB MO9379 Mode D'emploi page 5

CAUTIONS WHEN CHARGING:
1. When charging, please put this product on a dried or ventilated
area and keep it far away from heat source or explosive product.
2. When charging should be supervised by an adult so as not to
cause an accident.
3. After flying, please do not charge the Quadcopter if the surface
temperature is still not cool. Otherwise it may cause a swollen
battery or even a fire hazard.
4. Please make sure that you use the original USB charging cable
provided. When the battery has been used for a long time, or
appears to be swollen, please replace them.
5. A battery when not in use for a long time will lose its charge
automatically. Charging or discharging too often may reduce the
life of the battery.
READY TO FLY
1. Unfold the quadcopter and place it on a horizontal position, then
open up the power switch on the quadcopter. When the
indicator lights flash, it means that the quadcopter goes into the
flight standby mode.
Note: The antenna of the transmitter must be aligned the tail of
the quadcopter.
2. Open up the power switch of the transmitter. Push the left lever
(accelerator) to the highest point and then reset to the lowest
point. When the light in the quadcopter change to continuous
lighting, it means that binding successfully.