Renkforce 34 28 16 Notice D'emploi page 55

All manuals and user guides at all-guides.com
• To complete the programming process, press the OK key.

You can press the EXIT key at all times in order to return to normal mode.
The following example should help you to understand the feature more easily. A macro
is programmed here which switches on the TV set, switches to AV mode, switches on
the DVD player and, after a delay of five seconds, plays the DVD.
Progamming example:
• Press the MACRO key for approx. 4 seconds.
• Press the keys 2, 4, 6 and 8.
• Press the TV device selection key.
• Press the control key on which the macro is to be stored. In this
example the macro is saved on key 1.
• Press the On/Off key to switch on the TV set.
• Press the TV/VIDEO key to swtich the TV set to the AV input.
• Press the DVD device selection key in order to switch to the control
keys for the DVD player.
• Press the On/Off key to switch on the DVD player.
• Press the DELAY key to enter a break.
• Press key 5 in order to set a break of 5 seconds.
• Press the PLAY key to start playback on the DVD.
• Press the OK key in order to save the macro.
55