Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
•
Switch the device on whose IR codes you
want to program (e.g. the TV device) and
direct the universal remote control to the
device.
•
Press the appropriate device selection
key (5)
•
Press the AUTO key and wait until the
device switches off. Then press the user
interface of the universtal remote cointrol
in order to stop the search.
•
Press the left arrow key to select the last
code before touching the user interface.
You device should switch itself back on
again.
•
Press the On/Off key (top right). If the
device switches itself off again, the correct
code has been found.
•
Press the DISPLAY key. The correct code
is displayed. Note down this code to be
able to enter your requirements directly.
46
Operating Instructions
English
Publicité
