Nicols PAR LED 1810 FCB Notice D'utilisation page 9

:
Mounting
- Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket should be secured to
the mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit a safety
cable should also be used.
- Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the product
using the two adjustment knobs located on the side of the fixture.
TECHNICAL SPECIFICATION
LED PAR 18X8W RGBW FC
* Light sources: 18 x 10W LED RGBW 4 in 1
* DMX Channels Modes : 4ch , 8ch
* Operation Mode: DMX, Auto, Master/Slave, Sound active
* Dimmer: 0-100%
* Strobe 1-20Hz
* Beam Angle: 35°
* Voltage: AC 100-240V, 50/60Hz
* Consumption: 100W Max
* Dimension: 240 x 240 x 460 mm
* Weight: 2,4kg
Display panel menu instruction
]
[MODE menu selection or return to previous menu.
[UP] press [UP] through the menu list to increase/change the value of the current function.
[DOWN] press [DOWN] through the menu list to decrease/change the value of the current function.
[ENTER] confirm & quit out current function setting.