OPERATION
1. DMX Mode :
To set DMX Address, it is necessary to choose the DMX Mode before :
-> To set the 4 channels mode, press MENU until the digits display « dXXX » where XXX will be the DMX starting Address
described as CH1 in the tab below.
-> To set the 4 channels mode, press MENU until the digits display « AXXX » where XXX will be the DMX starting Address
described as CH1 in the tab below.
Use DOWN and UP button to change the DMX 512 address. Once the address has been selected, press ENTER button to setup
or automatically exit menu mode without any change after 1 minute.. Back to the previous functions without any change press
MENU button.
2. MASTER/SLAVE Mode
The product can be linked together to work in Master/Salve mode without any console. The 1
others will work as Salve unit at same effect.
3. Manuel Mode
Press the MENU button up to when the display shows on its first digit : "r", "G", "b", "u" or "F", Then access the 3 colors dimmers
and Strobe values that can be setted manually
4.
AUTO-Modes
Press the MENU button up to when the display shows on its 2 first digits : "CC", "DE" or "CP", Then access the speed parameter
to be set between 1 and 15.
5.
SOUND Mode
Press the MENU button up to when the display shows "SoUd".
Display Menu instruction (general)
No
Show
1
d001
2
A001
3
r255
G255
4
b255
5
6
u255
7
F000
CC15
8
9
DE15
10
CP15
Soud
11
Function
Value
DMX address
001~512
DMX address
001~512
Red dim
000~255
Green dim
000~255
Blue dim
000~255
White dim
000~255
Strobe
000~255
Colors Jump
01 ~ 15
Colors Gradate
01 ~ 15
Colors Pulse
01 ~ 15
Sound-Active
machine will be set as Master and
st
Instruction
4CH mode,UP,DOWN increase or
reduce the value,
8CH mode UP, DOWN
increase or reduce the value
UP, DOWN Change brightness
UP,DOWN Change brightness
UP,DOWN Change brightness
UP,DOWN Change brightness
UP,DOWN change the speed
UP,DOWN change the speed
UP,DOWN change the speed
UP,DOWN change the speed
SURE