English
The 99732 manifold electronic gauge determines the distance to the object through
electronic signals quickly and effective; the tool can display the result on the tow-row LCD
with back light. The tool with built-in computer chip has the function of key indication and
memory. It can be used in continuous accumulative measurement, automatic areas and
volume counting and is an ideal tool for building and decoration industries (for example, land
agent, upholstery designer and craftsman, etc.)
The tool has the function of laser orientation and it will send out a line of highlighted red
laser beam to make you aim at the object easily when using. The automatic temperature
compensation function of the tool can make the measuring result more accurately, and at
the same time show the current environment temperature precisely.
99732 manifold electronic gauge is the Class II laser tool conforming to IEC285 international
safety rule.
SAFETY INSTRUCTIONS
Failure to follow the instructions listed below may cause personal injury.
Read and understand all instructions prior to any operation.
Do not remove any labels from the tool.
Do not operate the tool with the presence of flammable/explosive gases.
Do not operate the laser tool around the children or allow children to operate the laser
tool. Failure to do so will injure eyes of children.
Do not stare into the laser beam.
Do not project the laser beam directly into the eyes of others.
Do not set up the tool at eye level or operate the tool on or near a reflective surface, as
the laser beam could be projected into your eyes or the eyes of others.
Do not observe the laser beam by using optical tools such as binoculars and magnifying
glass.
Remove the battery when storing the tool for an extended period of time in case of the
deterioration of battery and its damage to the tool.
Warning
DANGER
Class II Laser Product
Maximum Power Output< 1mW
Wavelength: 630-660nm
Do not stare into beam!
Avoid direct eye exposure!
This tool emits a laser radiation!
37