Model
Electrical data
Temperature range
Dimensions
Weight
Model
Electrical data
Temperature range
Dimensions
Weight
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger due to electric current!
• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into an appliance that is in operation or still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
CECM100
4000W / 230V / 50-60Hz
30°C – 70°C
W 1000 x D 630 x H 1788 mm W 1200 x D 630 x H 1788 mm
102kg
CEMC150
5600W / 230V / 50-60Hz
30°C – 70°C
W 1500 x D 630 x H 1788 mm W 1800 x D 630 x H 1788 mm
137kg
CECM120
4000W / 230V / 50-60Hz
30°C – 70°C
117kg
CECM180
5600W / 230V / 50-60Hz
30°C – 70°C
156kg
EN