Trademarks And Licenses - Alto Professional TS212W Guide D'utilisation

TS215W
Output Power
Low Frequency
High Frequency
Crossover
Maximum SPL
Frequency Response 50 Hz – 20 kHz (+ 3 dB)
Frequency Range
Coverage
Connectors
Cabinet
Controls
Protection
Power
Dimensions
(width x depth x height)
Weight

Trademarks and Licenses

Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc.
All other product or company names are trademarks or registered trademarks of their respective owners.
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
15" (380 mm) woofer, 2.5" (64 mm) voice coil
1" (25 mm) neodymium driver with precision waveguide
2 kHz
130 dB peak, 127 dB continuous (dB-SPL @ 1 m)
43 Hz – 22 kHz (-10 dB)
90° H x 60° V nominal
(2) 1/4" (6.35 mm) TRS or XLR inputs
(1) XLR Mix output
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Volume, power on/off with LED, clip limiter with LED, ground lift
Electronic clip, thermal and transducer overdrive protection
AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
Inrush current at initial switch-on: 3.61 A
Inrush current after power supply interruption: 3.91 A
15.6" x 14.1" x 25.7"
396 x 357 x 652 mm
32.7 lbs.
14.9 kg
39